JGYCustoms Project Cars/Current Customer's Cars

Joel's B13
Joel dropped off his B13 for some upgrades and dyno tuning.

going on lift

underhood
We will be installing a different transmission, one of our 3 inch exhausts, and tuning it with Nismotronics. We will also be refining some of the current set up.

underhood

replacement tranny apart
The replacement tranny is apart, awaiting his Helicoil Diff

diff
Here is the diff

LSD
Forum group buy gone bad. The supplied LSD fit Joel's axles, but not his transmission. After a few hours of removing material, we got the "forum LSD" to fit.

After a few hours of removing material, we got the forum LSD to fit.

case welded
To strengthen his transmission and to prevent it from cracking, we welded the case.

JGY Kevlar clutch
We installed a JGY Kevlar clutch.

welded bung
We welded in a bung for his wide band into a JGY header he bought.

exhaust
Installed a new JGY secondary header and JGY 2.5 inch catback exhaust with resonator

exhaust

exhaust

exhaust

install finished
Finished the install. Everything turned out great.

install finished

install finished

on the dyno
The car was tuned on the dyno with Joel's Nismotronics. We dialed in a nice idle, great AFR's, and good power numbers for him.